MS Polymer Adhesive|天美传媒 | Tile Grout-Adhesive-Sealant

sales@zszlok.com

Home page

MS Polymer Adhesive

Category:

Adhesive

Application:

Features:

It is suitable for bonding and laying of rock slabs, large slabs, and ceramic tiles, also widely used in rock slab background wall (bonding of Oriented Strandboard and rock slab or metal pendant and rock slab); custom furniture and wardrobe installation in the whole house; installation of under-counter basin, etc.

1. Almost zero odor, safe and environmentally friendly. 2. The surface curing time is 30 minutes, and the fully curing time is 24 hours, which is faster than glass glue and structural glue. 3. The principle of moisture curing perfectly solves the problem that glass glue, structural glue, and AB glue will fall off due to moisture in Oriented Strandboard?and other boards. 4. Super strong and durable bonding force, which is 5 times that of ordinary glass glue.

Product Profile:

天美传媒? MS Polymer Adhesive is a new type of environmentally friendly adhesive based on silane-modified polyurethane polymer. This technology originated in Japan and has been widely used in Japan, Europe, America and other markets.

Application:

Features:

sales@zszlok.com

Inquiry

MS Polymer Adhesive

Product Profile:

天美传媒® MS Polymer Adhesive is a new type of environmentally friendly adhesive based on silane-modified polyurethane polymer. This technology originated in Japan and has been widely used in Japan, Europe, America and other markets. MS Adhesive has super strong adhesion and durable weather resistance, and is suitable for bonding and laying of rock slabs, large slabs, and ceramic tiles. At the same time, it is widely used in rock slab background wall (bonding of Oriented Strandboard and rock slab or metal pendant and rock slab); custom furniture and wardrobe installation in the whole house; installation of under-counter basin, etc.

Volume: 590ml/Set

Shelf life: 9 months

MOQ: 1000 Sets

Delivery time: 20 days

Loading Port: Zhongshan or Guangzhou

No.	Test items	Unit	Testing Standard	Test results	Result
1	Apperance	——	Product should be a fine, uniform paste without air bubbles, crusts or gels	Smooth Paste meet the requirements	Pass
2	consistency	cm	specified value 7.5 ± 1	7.5	Pass
3	density	g/cm3	specified value±0.1	1.64	Pass
4	Surface curing time	min	≤60	10	Pass
5	Sag	mm	≤3	0.5	Pass
6	extrusion	ml/min	≥150	400	Pass
7	Hardness	HA	30 - 90	50	Pass
8	Anti-yellowing	168H/△E	≤ 6	< 2	Pass
9	Bonding Strength	MPa	≥ 2	3	Pass
10	Tensile modulus	MPa	HM: 23℃: >0.4 or -20℃:>0.6	23℃: 1.0; -20℃: 1.2	Pass
11	Tensile adhesion	——	no damage	no damage	Pass
12	Tensile adhesion after flooding	——	Soak in 23℃ water for 4 days, put it under standard test conditions for 1 day and then test: no damage	no damage	Pass
13	Cohesion after cold drawing - hot pressing	——	(Store at -20℃ for 3h, stretch for 21h: place at 70℃ for 3h, compress for 21h: after repeating one round, place for 3d under standard test conditions) is a cycle, after 2 cycles: no damage	no damage	Pass
14	mass loss rate	%	≤8	1.3	Pass
Remark	The test results will change with the change of temperature and humidity